SAT Systems was established in 1984
Sub Aquatic Technical Systems Ltd - Gas Analysis, Monitoring and Control - Data Logging and Communications offering Diving and Hyperbaric Solutions

Wednesday, December 11, 3:15 am

Series-5 *New Range of instrumentation

Air-5
SAT-5

Temperature and Humidity Monitor

Description

The AIR-5 temperature and humidity monitor is designed for monitoring air diving chambers. The temperature measurement range is -40 to 100ºC and the humidity measurement range is 0-100%RH. High and low alarms exist for both temperature and humidity readings. The monitor uses a sensor installed within the chamber which communicates with the AIR-5 unit via an RS485 data cable. The AIR-5 is housed in a rugged IP 65 rated die cast aluminium case. Each AIR-5 unit contains an internal data storage which provides a 12 month history of readings and operator inputs. The AIR-5 instruments are fitted with an RS485 data output port for connecting to an external centralised data logging system.

 

The Air-5 temperature and humidity monitor can be upgraded so that the signal from the temperature and humidity sensor passes through a small PLC with local display that will provide the control signals that are required to keep the temperature and humidity in the chamber at constant levels. The control signals can be simple ON/OFF functions or analogue 4-20mA signals to operate proportional valves.

Specifications

Model : AIR-5 Temperature and Humidity

Part Number : CO8-004-003-01-*-*

Range—Relative Humidity : 0 to 100 % RH

Range—Temperature : -40.0 °C to 100.0 °C (-40.0 °F to 212.0 °F)

Accuracy—Relative Humidity : ±1.5%RH @ 25°C, from 20 to 80%RH.

Accuracy—Temperature : ±2°C from -40 to 80°C.

Response Time—Humidity : 8 seconds

Response Time—Temperature : 30 seconds

Resolution : 0.1 Temperature / 1.0 Humidity

Housing : 110*140*60mm (Width, length , depth)

Power Requirements : 10 to 36VDC(5W)

Weight : 0.9Kg

Operating Temperature : 0 to +50 °C

Storage Temperature : -20 to +60 ºC

RoHS : Yes

Request Quotation
Request a Quotation

Thank you for your interest in receiving a Quotation for our instrumentation.


Below you will find three short steps to follow in order for us to produce a quotation. To enable us to deal with your request efficiently, please ensure that you supply your full Company details together with your exact requirements.

Please note: all quotations are manually generated based on the information you will supply. Details of your intended supply voltage (if applicable) will ensure we supply the correct product code and lead time.
step 1 step 2 step 3
Please register on our Helpdesk, supplying your full company details Please check the email account that you used when registering, we have sent you an email with a link to activate your account Once your account is activated - Login to our helpdesk and select Request and Quotation
Please Click Here To Register Now! If you do not receive our activation email or experience any problems registering, please Contact Us and we will manually create your account. Login To Our Helpdesk Now!

Data Sheets

Please use the form below to request data sheets for our New Series-5 Range of instrumentation.

Please Note: All data sheets are sent manually to the email address you supply - requests can take up to 48 hours to complete and are handled during our normal office hours.

Thank You


Data Sheet Request Form

Data Sheets




























S.A.T.Systems Ltd   1 Kelly Industrial Estate, Kirk Michael, Isle of Man,  IM6 1SS